Thin Section Bearings:
JSHA SERIES
JSHA SERIES 1/4" x 3/16" Sealed Thin Section Bearings
|
Type C
Radial Contact
|
Type X
Four-Point Contact
|
| SILVERTHIN BEARINGS • JSHA SERIES 1/4" x 3/16" | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SILVER THIN PART NO. & RFQ |
DIMENSION IN INCHES | CAPACITIES IN POUNDS | TYPE C | TYPE X | Torque Max No Load (Oz-In) |
Appx. Weight Pounds |
||||||||
| Bore B |
Outside Diam. D |
Land Diam. L1 |
Land Diam. L2 |
TYPE C & X | TYPE X | |||||||||
| Radial | Thrust | Moment (Lbs-in) |
Limiting Speeds (RPM) |
Limiting Speeds (RPM) |
||||||||||
| Static | Dyn | Static | Dyn | Static | Dyn | |||||||||
| JSHA10 | 1.000 | 1.375 | 1.140 | 1.235 | 302 | 158 | 736 | 379 | 177 | 93 | CONSULT FACTORY | CONSULT FACTORY | CONSULT FACTORY | .026 |
| JSHA15 | 1.500 | 1.875 | 1.640 | 1.735 | 413 | 188 | 1,055 | 468 | 347 | 151 | CONSULT FACTORY | CONSULT FACTORY | CONSULT FACTORY | .039 |
| JSHA17 | 1.750 | 2.125 | 1.890 | 1.985 | 476 | 213 | 1,156 | 517 | 452 | 198 | CONSULT FACTORY | CONSULT FACTORY | CONSULT FACTORY | .049 |
|
1. For application load information contact Mechatronics engineering.
|
2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is .015.
|
3. Bearing width tolerance +.000-.005
|
||||||||||||||||||||||
