Ball Bearings: 6000 Series
6000, 6200, 6300 Series Radial Internal Clearance

Single Row
Deep Groove Ball Bearings

• C/1 - Internal Clearance is smaller than C/2.
• C/2 - Internal Clearance is smaller than STANDARD.
• STANDARD - No clearance marking is indicated on the bearing or packaging.
• C/3 - Internal Clearance larger than STANDARD.
• C/4 - Internal Clearance larger than C/3.
• C/5 - Internal Clearance larger than C/4.

6000 • 6200 • 6300
Radial Internal Clearance Options

RADIAL INTERNAL CLEARANCE OPTIONS
Bore Diameter
d (Metric)		 Radial Internal Clearance (Inch)
C/2 Standard C/3 C/4 C/5
Over Incl. min max min max min max min max min max
2.5 6 .0000 .0003 .0001 .0005 .0003 .0009 .0005 .0012 .0008 .0014
6 10 .0000 .0003 .0001 .0005 .0003 .0009 .0005 .0012 .0009 .0018
10 18 .0000 .00035 .0001 .0007 .0004 .0010 .0007 .0013 .0010 .0019
18 24 .0000 .0004 .0002 .0008 .0005 .0011 .0008 .0014 .0011 .0018
24 30 .00005 .00045 .0002 .0008 .0005 .0011 .0009 .0016 .0012 .0021
30 40 .00005 .00045 .0002 .0009 .0006 .0013 .0011 .0018 .0015 .0025
40 50 .00005 .00045 .0002 .0009 .0007 .0014 .0012 .0020 .0017 .0029
50 65 .00005 .0006 .0003 .0011 .0009 .0017 .0015 .0024 .0021 .0035
65 80 .00005 .0006 .0004 .0012 .0010 .0020 .0018 .0028 .0025 .0041
80 100 .00005 .0007 .0005 .0014 .0012 .0023 .0021 .0033 .0030 .0047